You have no items in your shopping cart.



Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

A Huge Wave of Raspberry Pi Add-ons is Coming

Itead is planning to launch several Raspberry Pi shields soon including Screws Prototype Add-on, GSM Add-on, LCD1602 Add-on, GPS Add-on and lego Add-on, etc.

Now let's have a quick look at these boards.

Screws Prototype Add-on extends all pins of Raspberry Pi 2*13 pin connector out to 3.5mm pitch screw terminals. 
It also has a lot of utilities provided by Arduino Protoshield, including a large prototyping space of both connected and unconnected 0.1'' spaced through-holes.

LCD1602  Add-on is a LCD keypad add-on for Raspberry PI, which can be directly plugged onto the PI, no soldering or fly-wiring needed. It offers 6 keys as well as interfaces of 1602LCD module.

GPS Add-on is based on NEO-6M GPS module. The NEO-6 module series is a family of stand-alone GPS receivers featuring the high performance u-blox 6positioning engine, which brings the high performance of the u-blox 6 positioning engine to the miniature NEO form factor. 


  • With Micro SD interface
  • Active antenna design with high receiving sensitivity, compatible with normal antenna
  • Extremely rapid locating at low-signal level
  • UART interface
  • Operation temperature: -40℃ ~ +85℃

GSM Add-on is a breakout board and minimum system of SIM900 Quad-band GSM/GPRS module. It can communicate with Raspberry PI via AT commands (GSM 07.07, 07.05 and SIMCOM enhanced AT Commands). This module supports software power on and reset.


  • Quad-Band 850/ 900/ 1800/ 1900 MHz
  • GPRS multi-slot class 10/8GPRS mobile station class B
  • Compliant to GSM phase 2/2+Class 4 (2 W @850/ 900 MHz)
  • Class 1 (1 W @ 1800/1900MHz)
  • Control via AT commands (GSM 07.07 ,07.05 and SIMCOM enhanced AT Commands)
  • Low power consumption: 1.5mA (sleep mode)
  • Operation temperature: -40°C to +85 °C

It is estimated that the above peripherals for Raspberry Pi will be on sale before New Year’s Day of 2014, so stay tuned.