Loading...

You have no items in your shopping cart.

 
 
 
×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

An introduction to Core EVB

Core EVB is a customized evaluation board for ITEAD Core AW204x, which pinouts the functional pins of AW204x to the corresponding physical interface such as USB ports, SD card slot Ethernet port etc. Moreover, Core EVB provides a 40 pins interface that is compatible with RPI B+, which will help developers utilize the existing Add-on more easily.

Common A20 development boards in the market only provide Line-in/Line-out interface so that they can't drive a loudspeaker directly. However, we add power amplifier so that it can drive 4ohm or 8ohm speaker easily.

The dimension of Core EVB is designed according to an aluminum box, thus, this development board can be installed to IBOX.

Specification

Compatible Module AW2041 & AW2042
Display LVDS * 1 18/24 bit single or dual channel
HDMI * 1 HDMI 1.4
Audio audio jack * 1 3.5mm CTIA,drive capability: 8ohm speaker @3w
SPDIF * 1 SPDIF fiber
I/O 2*16 pin (J4) UART/I2C/SPI/I2S/GPIO
2*20 pin (J5) UART/I2C/SPI/GPIO, Compatible with RPI B+ 40-pin interface
Ethernet Ethernet * 1 10M/100M/1000M adaptable
USB 4 3 for USB2.0 full speed, 1 for USB OTG
IR 1  
Indicator 1 bicolor LED
Button 3 Power/Reset/FEL
Power 1 7-23V DC in,2.5mm power jack
Storage SATA * 1 on-board SATA on AW204x;on-board external 5V SATA on Core EVB
Micro-SD * 1 support up to 32G micro SD card

Go to its wiki page to get more information.

Electronic Characteristics

Working environment

  • Temperature: 0℃ ~ 60℃
  • Humidity:5% ~ 95%

Storage environment:

  • Temperature: -40℃ ~ 80℃
  • Humidity: 5% ~ 95%

Current Consumption

The current consumption is based on the following situation without any device assessing to Core EVB

  • Core: AW2041
  • Core EVB 
  Min Type Max Unit
Current Consumption 200 300 mA

ITEAD Core AW204x installation

Brand new SO-DIMM 204 pins socket is for plugging in and pulling out ITEAD core easily. The following picture will show you how to install core to EVB.

You can unplug the core by pulling out the clasps both on the right and left side.

Fully compatible with IBOX case.