×
Registration
Please Fill Recaptcha To Continue
First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!
-
There are two products in imall.iteadstudio.com for ultrasonic ranging. One is the common 4pin HC-SR04, and the other is 3pin SDM-IO. The ultrasonic ranging product can be installed in the previous joystick wireless control car kit so that the car … Continue reading →
-
Raspberry PI 2.8 TFT Add-on is customized for Raspberry Pi based on 2.8 TFT LCD display module. The screen is driven based on an 8-bit data bus and a 4-bit ILI9323DS to control bus interface, which can display 263K colors. … Continue reading →
-
(If you find the video is blur, please make sure you've choosen the right resolution 480P.) RDM8800 card reader is a module based on PN532 chip customized for 13.56MHz NFC RFID card, compatible with RDM6300 interface, which can read data … Continue reading →
-
Before maker faire 2014 commences, we finished version ITEAD OS 2.0BETA of A10 and A20 versions and upgraded the original ITEAD OS SDK. The new codes have been updated to github HERE. In order to validate and demonstrate SDK, we … Continue reading →
-
In IBOX sample test phase, a trial user used this mini single-board computer as the dedicated control host for his 3D printer. He was wondering whether a baseboard can be customized to control 3D printer, and ITEAD A20 CORE and … Continue reading →
-
By using ITEAD A10/20 CORE with different functional baseboards, you can easily achieve a variety of specific application development. Here, we’d like to show you an example of applying ITEAD A20 CORE with NFC intelligent system baseboard. Framework of the … Continue reading →
-
Recently we launched a board Arduino Plug for Iteaduino Plus, which breaks out SPI, IIC and UART interfaces on Iteaduino Plus to one Arduino-compatible interface and another compatible with Xbee. There is an OLED screen on the shield that can be … Continue reading →
-
In the previous blog, we made a brief introduction to structure and function of ITEAD OS and SDK, and now we want to experience how to use SDK API to realize display function of OLED screen on Iteaduino Plus. To … Continue reading →
-
Iteaduino Plus is an open-source ARM development board, which is based on Allwinner A10 SoC, small size, hacker friendly, extendable and very low-cost. Itead customized IteadOS, an operating system based on Ubuntu for it, offers operation function of the underlying hardware … Continue reading →
-
ITEAD OS BETA version only provides functions of UART, GPIO, PWM, and TIME for testing, as we have introduced functions UART and GPIO, here I'll show you how to use function PWM in ITEAD OS SDK. First, let’s use pwm function to … Continue reading →