You have no items in your shopping cart.



Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

Bluetooth And Wifi Debugging Assistant

"Bluetooth And Wifi Debugging Assistant" is an assistant software for debugging Bluetooth and Wifi communication which is developed by ITEAD R&D development. This software can be used to monitor the Bluetooth communication of cellphones and TCP communication via WIFI, which also supports data transmission via cellphones to Bluetooth devices or network devices in the same network segment.

Select "Bluetooth" option in the main interface to enter the Bluetooth communication debugging assistant interface. Before entering the monitor window, use the cellphone to search for Bluetooth devices first, and then you can select the Bluetooth device for connecting and debugging. After connection, enter the monitor interface, where we can monitor all the data information in this Bluetooth communication link in the content window.

For data which is sent to the cellphone from Bluetooth devices, it will be automatically displayed on the monitor window and prompted as "–>". If you need to send data from the cellphone to the Bluetooth device, enter the contents in the input window and "send" button, the data will be sent to the device via Bluetooth, and the contents will also be displayed in the monitor window but it will prompt "<–" to indicate the direction of data.

If the communication content that you want to use is not an ASCII string, you can select "display HEX" and "send HEX” to display and to send hexadecimal data .

In addition to the Bluetooth communication debugging, the assistant software also supports TPC communication debugging when the cellphone is connected to Wifi. If you want to connect to a TPC host, select "TCP client" button to enter the TPC client monitor interface.

"Client mode" will be displayed in the interface. Then enter the host IP address and port number in the same network segment that you want to connect to, select "Connect" button, the software will try to initiate TPC connection. If "Connecting to the Server succeeded" is displayed and "connect” button becomes "stop connection”, it indicates successful connection to the server. Press “stop connection" button again to disconnect TCP connection to the server.

After successfully connecting to the server, the monitor window will display all the data contents transmitted between the cellphone and server as the Bluetooth monitor does . In the text box, enter the data to be sent, select "Send" button to send data to the server. Similarly, in addition to supporting ASCII string, it can also be switched to HEX mode for hexadecimal display and sending .

If the device to be debugged works as a TCP client, then it needs to connect to a server, you can select the "TCP server" button to enter the TCP Server mode interface.

Press the "Start service" button, the cellphone will be activated as a TCP server, and the IP address and port number of the cellphone for connection will be displayed after successful connection, and "Start service" button will become “Stop service”. Press the "Stop service" button, the cellphone will stop TCP server program and the client cannot be connected. If the “Stop service” button is pressed when TCP connection is already established, it will disconnect the TPC connection and stop the service.

After the service is started, it allows the client to connect to the cellphone via the IP address and port number in the software interface. After successful connection, all the communication contents will be displayed in the monitor window, and all the subsequent operations are the same with those of the TCP client. The software now supports only one concurrence, that is, it only supports TCP connection with one client simultaneously.

You can download the BETA version in google play now, click HERE.

Related Articles: