You have no items in your shopping cart.



Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

IBOX Production Schedule Update 20140331

1, arduino add-on has been finalized , the prototype board has been finished testing, and it will begin for  mass production.

Here, we would like to show you some high-resolution photos of " arduino add-on " .


  • interface for arduino shield;
  • two Grove interfaces for electronic bricks;
  • SATA interface and 5V external power supply ;
  • On-board USB-TTL chip CP2102, can be identified as a serial port in the computer after connecting to a MicroUSB cable

With regard to driver installation, please refer to this document http://www.pololu.com/docs/pdf/0J7/cp2102_driver_installation.pdf .

2, Release IteadOS 2.0 alpha for ibox

On the basis of IteadOS1.0, we made the following updates:

  • Replaced fs of linaro with debian7.0 since linaro has many small bugs such as failing to shut down in graphical interface
  • Rewrote the entire SDK code to optimize GPIO rate, etc.
  • Newly added IteadOS for A20

To download mirror image, please visit http://itead.cc/down/class/
For how to use and to get the latest version of SDK, please refer to https://github.com/iteadsw/sdk
For how to program IteadOS to SD card , please refer to http://blog.iteadstudio.com/installing-itead-os/

3, Mindaugas Markauskas gave us feedback to the sample he received: "2 of 4 screws (near IO side) holding bottom plate aren't holding anything (they are only screwing infinitely)". This is because the screws are too short. Now, we have ordered new materials, and the screw M3 * 8mm will be replaced by M3 * 16mm. As we found in the test, the new screws can perfectly fix the bottom plate.

Thank you all for your time to review. We do welcome you guys to offer more optimization tips, and we hope to fix the small problems as many as possible before delivery of products.