Loading...

You have no items in your shopping cart.

 
 
 
×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

ITEAD Bluetooth Robot Panel Update

After we released the first version of Bluetooth car / robot control software, we received a lot of feedback from the users, and according to which we made some small modifications and updated them in a new version.

Many guys say that it only supports character input, yet can not support hexadecimal / binary input, which causes some trouble for some special applications such as when using line breaks. Now we have done some modifications, anyway, it still does not support hexadecimal / binary input, but we've added two options so that you can add the line breaks which you need behind the characters you sent. When you select "\ n", you can add 0x0A to the end of the character string command you sent; when you select "\ r", you can add 0x0D. That is to say, you can choose the end data according to your own needs. In addition, in the character content page, it now supports some English symbol input as well as the original letters.

We also modified the way of data sending. Now, when the button is pressed, a corresponding command will be sent; when the button is released, another corresponding termination command will be sent. In this way, data will not be constantly transmitted when the button keeps being pressed down. Previously, when several buttons are pressed simultaneously, the data would be quite confusing. So now, in the new interface, you can set the data sent when pressing or releasing each button, the default is that a "SS" string command will be sent when all the buttons are released.

I hope our software brings convenience to your Bluetooth car / robot development, so that you can focus on the car / robot development without worrying about the design of the cellphone control terminal. If you have any problems in use, please feel free to contact us.

You can downlaod the new version HERE.