Brief Sometimes we need to start our software applications automatically on boot in linux, especially when we play with things like BeagleBone and Raspberry Pi in embedded world. Here are two ways to do it. 1. Using .profile When a … Continue reading →

The 2015 Chinese Spring Festival is coming soon, and we will have a 12-day holiday then. Here, we would like to release the order processing schedule in advance so that you can place your orders ahead of time.

Adopted a standard XBee interface, Wee WiFi module pinouts ESP8266 Soc to provide a full IOs using for hacking. This tutorial is a start guide for testing AT commands on Wee WiFi module. Hardware Wee WiFi module Foca Pro Software … Continue reading →

Recently, our new hardware engineer Li Yun studies IWATT’s AC-DC solution. He finds out that the basic theories of all solutions are the same, and the different performance due to using different electronic components. Among all the AC-DC solutions, there … Continue reading →

In this blog, we will test two AC-DC modules output situations. The test aims to examine the output ripple of each AC-DC module under the circumstance of different load current. These two modules all can be sold on ITEAD’s imall.  AC-DC … Continue reading →

ITEADLIB_Arduino_IoTgo is an Arduino library specially written for IoTgo platform. It supports ESP8266, W5100/W5500, and SIM900/908 modules accessing and communicating to IoTgo platform through WIFI, GPRS, or Ethernet. In previous two blogs, we've demonstrated how to remote monitor temperature and humidity … Continue reading →

Dear all Airspy fans, We are sorry to inform you that the second batch Airspy shipping will be delayed.  The aluminum enclosure should have been arrived on Friday this week. However, the cooperated factory tells us that the aluminum enclosure only … Continue reading →

For now, IoTgo platform only supports three devices: temperature and humidity sensor, light and switch. And it only provides some basic operations for these devices. In the future, we will devote to develop this platform to support more devices and … Continue reading →

In this tutorial, we use Wboard Pro and SHT10 temperature and humidity sensor as example to communicate with IoTgo platform so that we can realize a remote temperature and humidity sensor that can be visited via internet. For the Hardware … Continue reading →

This artical is originallly from mcauser's Github. He shares how to use Raspberry Pi with ITEAD Studio RPI GPS Add-on. We reprint this artical here to help starters to do the Raspberry Pi hacking. ITead Studio product page