Loading...

You have no items in your shopping cart.

 
 
 
×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

Seleae Logic + USBee AX + USB Blaster

We have hacked the Seleae Logic Analyzer and found that it’s a CY7C68013A system, we can crack it in our ITDB01 board to make a cheap clone for our sample bus analysis.

Now we find a powerful USB Blaster, it can be used as a logic analyzer, not just the Seleae but also the USBee AX!

This mini logic analyzer is come with the case and the cables. If you want to change it to other mode(Default Seleae) like USBee , you need to open the case and modify the jumpers.

See the Seleae jumper below:

there are two jumper for firmware selection, it means choose one of the three EPPROM for boot up.And choose the I/O selection, it’s the 10 pins of cables connection.

If you want a USBee AX, just modify the jumper as below:

Note that modify the jumper when power off! Don’t make anything when the tool power on. When you use the Seleae or USBee mode, the hardware can be identified as a Seleae USB Logic by Seleae software or USBee AX by USBee software. Now you can spy it on the data bus that you want to analyze.

Below is the USB Blaster setting:

When the hardware be set to USB Blaster mode , it can work as a ALTERA USB Blaster (Clone).You can use it for many CPLD/FPGA programming and debugging.

It’s a nice tool for hobbyist who need to debug their project, expertly CPLD/FPGA/DSP project.

This mini logic will come with case and cables, there are three types of cable in package:

First one is breadboard jumper interface, you can plug the cable with any pins on PCB board.

Second one is the probe cable, it can be connect to more position on your board.

The last one is the 10 pins cable which for USB Blaster. And the package will includes a Type B USB cable.

What’s more? There is a CD in the package, it includes :
  • NetFramework – you need to installed it before setup the Seleae and USBee.
  • Seleae Logic Setup – the install  file and guide
  • USBee1.1.49 – the install file and guide

This mini logic will be sold in our iStore, and the price is $49.9.