Loading...

You have no items in your shopping cart.

 
 
 
×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

Sniffer Nano is coming

 

We have completed the final debugging of the Sniffer Nano. It works well, the first version firmware will not include the ID store and protocol switch , but still retained the buad rate setting function so you can change the UART baud rate by serial command.

As normal use, you just need RX TX and INT pins for data communication.Besides,there are 6 reserve  I/O pins for extension .We can use these I/O for drivering LED ,buzzer or relay, even to control a RF module for wireless communication.In the public version firmware will not include these etension function ,but you can modify the code to achieve it.Also you can connect us for help to customize a special version for you.

In order to allow more users to more easily understand the code and participate in, we make our firmware base on Arduino library. All the code will open source, so user can modify the code by themselves for meeting their special requirements.Of cause, we will keep improving the firmware and publish them. Using the Arduino bootloader, user can easily update their module via serial ports by Arduino IDE.

Basic features

  • Smaller than many other module
  • Low power consumption for embedded systems
  • Support setting Protocol and Baud by serial command
  • Soldering package compatible with both SMD and DIP
  • Standard 100mil spacing package, can be directly used in bread board
  • Interrupt evoking trigger
  • Open source, based on Arduino. Support update firmware

Specifications

  • Frequency: EM4100 protocal (125khz Read-only)
  • Baud rate:4800-115200 bps
  • Power:5VDC (±5%)
  • Current Consumption:<50mA
  • Reading Distance: 0-30 mm (Different manufacturers and shape of the card ,difference distance.)
  • extensin I/O:6
  • Indicators:Power
  • Operating temperature:-10℃~+60℃

For more detailed information, you can download the Sniffer Nano Manual.

  Sniffer Nano Manual1.0 (unknown, 580 hits)

The same advertisement : you can got it on our webshop.

If you have any suggestions or any Custom Requirements,do not hesitate to connect with us, just fell free to send us a E-mail or leave the comments.