×
Registration
Please Fill Recaptcha To Continue
First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!
-
Posted on June 28, 2016
By: elsie & filed under
Tutorial
Test Info System image:2016-03-18-raspbian-jessie.img Board type: Raspberry PI 3 RPI LCD1602 Add-on V2.0 Follow the tutorial to operate, run it through Link:http://www.gooligum.com.au/blog-section/LCD1602-setup RPI OLED Add-on V2.0 Enable Raspberry Pi i2c Modify the configuration file: sudo nano /etc/modules,Add two lines showed … Continue reading →
-
Posted on March 22, 2016
By: elsie & filed under
Tutorial
TennesseeTitansJerseys PIFI DAC expansion board (PiFi DAC +) is dedicated for Raspberry Pi 2B/3/B +, which features TI's higher-end DAC chip (PCM5122), I2S interface(non-USB interface). It supports volume controlled by hardware (the old DAC uses PCM5102A chip hardware, which can … Continue reading →
-
We have posted many articles about using Nextion to work with Arduino. But maybe you don’t know how to use it with Raspberry Pi. This post I'm going to teach you how to achieve it. There are just 5 steps.
-
Posted on September 18, 2015
By: elsie & filed under
Tutorial
Alarm System is an intelligent voice alarm system based on SIM800 module and Raspberry Pi B+. We will teach you how to build this project in this post. First of all, download the related data from this website: https://github.com/itead/ITEADSW_RPI_AlarmSystem You … Continue reading →
-
Posted on July 20, 2015
By: elsie & filed under
Tutorial
We’ve received many support tickets for asking how to make Raspberry Pi B+ 2.8 TFT Add-on V2.0 touchable. In this blog, we will demonstrate how to make Raspberry Pi B+ 2.8 TFT Add-on V2.0 show desktop upon Raspberry Pi B+ … Continue reading →
-
Posted on February 2, 2015
By: Sherry & filed under
Hack Notes
Brief Sometimes we need to start our software applications automatically on boot in linux, especially when we play with things like BeagleBone and Raspberry Pi in embedded world. Here are two ways to do it. 1. Using .profile When a … Continue reading →
-
Posted on November 22, 2014
By: Sherry & filed under
Hack Notes
This artical is originallly from mcauser's Github. He shares how to use Raspberry Pi with ITEAD Studio RPI GPS Add-on. We reprint this artical here to help starters to do the Raspberry Pi hacking. ITead Studio product page
-
Raspberry PI 2.8 TFT Add-on is customized for Raspberry Pi based on 2.8 TFT LCD display module. The screen is driven based on an 8-bit data bus and a 4-bit ILI9323DS to control bus interface, which can display 263K colors. … Continue reading →
-
Posted on August 12, 2014
By: Sherry & filed under
Tutorial
We’ve received many support tickets for asking how to make Raspberry PI 2.8 TFT Add-on touchable. In this blog, we will demonstrate how to make Raspberry PI 2.8 TFT Add-on V1.1 show desktop upon Raspberry Pi v2 and its touch … Continue reading →
-
Posted on June 7, 2014
By: jerry & filed under
Tutorial
ITEAD PN532 NFC module is equipped with double-row pins, which can be connected directly to the Raspberry Pie via connection cable and then drive the module for non-contact near field communication operations, such as reading and writing 13.56M IC card. … Continue reading →