×
Registration
Please Fill Recaptcha To Continue
First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!
-
Posted on May 11, 2015
By: Sherry & filed under
Tutorial
A time attendance system machine may be the first thing you meet when you go to your office and start your work. The most common type is using card. In this blog, we will use Arduino and several modules to … Continue reading →
-
Posted on November 11, 2014
By: Sherry & filed under
Tutorial
RDM6300 is a 125KHz card reader mini-module designed for reading code from 125KHz RFID card. It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc. In this blog, we will utilize … Continue reading →
-
(If you find the video is blur, please make sure you've choosen the right resolution 480P.) RDM8800 card reader is a module based on PN532 chip customized for 13.56MHz NFC RFID card, compatible with RDM6300 interface, which can read data … Continue reading →
-
RDM8800 is another RFID card reader launched by ITEAD STUDIO after RDM6300. RFID is Radio Frequency Identification for short. At present, the most commonly used RFIDs are 12.5 KHz EM4100 card and 13.56MHz ISO 14443 Type A card. RDM6300 card … Continue reading →
-
Posted on June 7, 2014
By: jerry & filed under
Tutorial
ITEAD PN532 NFC module is equipped with double-row pins, which can be connected directly to the Raspberry Pie via connection cable and then drive the module for non-contact near field communication operations, such as reading and writing 13.56M IC card. … Continue reading →
-
By using ITEAD A10/20 CORE with different functional baseboards, you can easily achieve a variety of specific application development. Here, we’d like to show you an example of applying ITEAD A20 CORE with NFC intelligent system baseboard. Framework of the … Continue reading →
-
Posted on June 26, 2013
By: jerry & filed under
Tutorial
ITEAD PN532 NFC module is equipped with double-row pin, which can be connected directly to the Raspberry Pie via connection cable and then drive the module for non-contact near field communication operations, such as reading and writing 13.56M IC card … Continue reading →
-
Posted on June 21, 2011
By: itead & filed under
Tutorial
We have the 125KHz RFID reader module RDM630, it can read the 125KHz RFID card and tag, but it can not write the data into these card and tag, so when you meet the R/W requirement of your RFID project, … Continue reading →
-
The Sniffer Nano Firmware is update to v1.1, and it’s patched by Flemming Frandsen. Flemming Frandsen is a Danish designer who bought our product, he found that the Sniffer Nano source code is not easy to read and written in … Continue reading →
-
Sniffer Nano v2.0 is a mini RFID reader module that basis on Arduino. The size of Sniffer Nano v2.0 just 23mm x 20mm x1.6mm, but it’s multifunctional than many other RFID module, user can use the serial and AT command … Continue reading →