Loading...

You have no items in your shopping cart.

Currency
 
 
 
×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

Gboard 800 is a unique Arduino board which features a SIM800 GSM/GPRS/BT module, an XBee socket, nRF24L01+ module interface and an ATMega328P controller.

Gboard 800 SIM800 GSM GPRS Bluetooth Module Board For Arduino Starter

Model: IM141125007
$46.00

Availability: In stock

Gboard 800 is a unique Arduino board which features a SIM800 GSM/GPRS/BT module, an XBee socket, nRF24L01+ module interface and an ATMega328P controller.
 

Product Description

Details

Overview

 

Gboard 800 is a unique Arduino board which features a SIM800 GSM/GPRS/BT module, an XBee socket, nRF24L01+ module interface and an ATMega328P controller. This board can be added wireless XBee / nRF24L01+ control as well as GSM/GPRS connectivity to your projects. It`s great for anything from home automation to robot control. The possibilities are endless!

Gboard 800 can be used as a GSM/GPRS data transfer or wireless communication project development platform. Gboard supports wide range power supply and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, which offers an easy way for a quick prototyping. The board requires FTDI basic board to upload sketch, you can use our Foca board to do it.

Note:

    1. Gboard 800 has a micro USB connector only for debugging or firmware uploading.
    2. When you upload sketch to Gboard, please choose the board Arduino Duemilanove w/ ATmega328.
    3. The bootloarder file is ATmegaBOOT_168_atmega328.hex, you can find it in the directory arduino\hardware\arduino\bootloaders\atmega
    4. The serial interface (bootloader connection) is 3.3v, not the typical 5v as on many Arduino boards - anyone using an alternative to the Foca board must take note not to risk damage.

Attention: You can power the board through either the DC jack or the battery socket but NOT both at the same time. There is no Li-ion battery charger circuit on this board.

Specification

PCB size 88.1mm X 60.7mm X 1.6mm
Power supply 7-23V DC
Microprocessor Atmega328
Indicators PWR, Status, NET
RoHS Yes

Electrical Characteristics

SpecificationMin.Typical ValueMax.Unit
Power Voltage 7 - 23 VDC
Input Voltage VH (Target Voltage = 3.3V) 3 3.3 3.6 V
Input Voltage VL: -0.3 0 0.5 V
Current Consumption - 100 500 mA

Documents

Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.

Technical support

For technical support, please open a ticket on Itead Support System.

Additional Information

Additional Information

Discontinued Yes
Link Wiki No
Microcontroller ATMega328P
External Resources
  • Onboard Wireless
  • Electronic Brick Interface
RAM Capacity 2K
FLASH Capacity 32K
I/O Operation Level 3.3V
Board Size 88.1mm X 60.7mm X 1.6mm
Version 1.0
Weight 75 g

Reviews

Write Your Own Review

Only registered customers who has bought this product can write reviews. Please, log in or register.