You have no items in your shopping cart.



Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

ITEAD A10/A20 CORE is a minimum system development board based on Allwinner A10, which is more powerful than Rasberry Pi and extendable with very-cost.

ITEAD A10/A20 Core

Model: IM130808001
ITEAD A10 Core is a minimum system module based on design of A10 chip. It was designed as a COM (Computer on a Module) with on-board FLASH, RAM and integrated PMU. Besides, it breaks out most of the GPIOs and buses through pin headers, which facilitates users to make secondary development. In addition, pins of A10 Core are 100% compatible with those of A20 Core, thus it is quite convenient for users to upgrade later on.

Product Description


Not Recommended for New Designs (NRND)

Replaced By AW204X– The device has the SAME FUNCTIONALITY as the compared device, but is not pin-for-pin equivalent. ITEAD does not recommend using this part in a new design. This product continues to be in production to support existing customers.


ITEAD A10 CORE is a minimum system module based on design of A10 chip. With ARM Cortex A8 core, it supports maximum frequency up to 1GHz. The module is equipped with 1G DDR3 memory and 4G FLASH. The digital circuit section and the overall power design of SDRAM on the module has been completed, so it can work directly after powering up with a stable 5V supply.

ITEAD A20 Core is the upgraded version of A10 Core, which adopts dual-core and supports dominant frequency up to 1GHz. Other configurations are completely same with A10 Core, and pins of the two version are 100% compatible, thus hardware can be replaced directly. 

To use ITEAD A10/A20 CORE for project development, design of complex multi-layer high-speed circuit is not required, as you only need to provide it with a stable 5V power supply and connect the pins on the module to the corresponding socket (such as HDMI, Micro-SD card, USB, etc.), or to the relevant circuit bus (such as I / O ports, UART, SPI, etc.). With design of such functional board, the difficulty will be decreased compared to directly using chips with SDRAM, FLASH, power circuit and functional circuit for the layout and the project development cycle will also be greatly reduced.

Ordering Information

Options SKU  Price 
 A10-0G   IM130808002   $42
 A10-4G  IM130808003  $45
 A20-0G  IM130808004  $45
 A20-4G  IM130808005  $48


Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.

Technical support

For technical support, please open a ticket on Itead Support System.

Additional Information

Additional Information

Discontinued Yes
Link Wiki N/A
External Resources No
I/O Operation Level 3.3V
Board Size 62.72 X 56.39 X 1.61mm
Model IM130808001
Version V1.0
Weight 50 g
  • Ethernet cable
  • Power cable
  • USB cable


Write Your Own Review

Only registered customers who has bought this product can write reviews. Please, log in or register.