128x64 OLED Screen Customized Shield Add-on V2.0 For Raspberry Pi

Overview

There are seldom OLED add-ons in the open source hardware market, customized specifically for Raspberry Pi. In many projects, we only need to display little information such as the state of system or IP address. What`s more, when users have a high requirement for its portability, it`s unsuitable to connect a big screen to Raspberry Pi via HDMI interface. Thus, a tiny OLED add-on can satisfy this user demand.

OLED add-on with built-in 0.96" 128*64 OLED and SSD1306 control chip is customized for Raspberry Pi. Each pixel in OLED can be lighted up or off by this SSD1306 control chip.

We not only offer an easy plug in, add on for Raspberry Pi but also provide an SDK that enables users to transplant Arduino's driver into Raspberry Pi. After proper installation of the SDK, users can drive this add on as easily as if using it on Arduino.

Check out the amazing features of this product below:

Feature

•Customized for Raspberry Pi, plug and play without any wiring

•0.96" OLED with 128*64 resolution

•Stackable

•Coming with 2.54 interface for Electronic bricks

The V1.0 is customized for Raspberry Pi:

Technical support

For technical support, please open a ticket on Itead Support System.