ITDB02-5.0 display module is a 5.0" TFT LCD with 65K color 800 x 480 resolutions for Arduino starter. The controller of this LCD module is SSD1963. It supports 16bit data interface with control interface of 4 wires. Moreover, this Arduino LCD module contains the touch screen and SD card socket as well.
ITDB02-5.0 is a professional Arduino TFT LCD display module that supported by UTFT Library.
Note: If users want to use it with Arduino Mega or Arduino ADK, they will still need an ITDB02 MEGA Shield(IM120417024), as shown below:
Please visit our wiki page for more information about this product. Any suggestions for improvement, such as correcting errors, adding more demo codes or tutorials, will be highly appreciated.
For technical support, please open a ticket on Itead Support System.
|Display Resolution||800 x 480|
|Display Interface||Parallel 16 Bit|
|Screen Type||Touch Screen|
|TFT display interface||Parallel 16 bit|
just to add my astronomic clock : 2lcd itb2 5.0" 2 interface for arduino mega2560 and 2 arduino mega2560 and a lot of works to do it : dailymotion.com/video/x38n591_astro-ii-astronomical-clock_tech
Thanks ITEAD !
Touch works without any modifications using the latest library. Just make sure you change the, #define TOUCH_ORIENTATION to LANDSCAPE and replace the 32s with 50 in myGLCD(ITDB32S,38,39,40,41) , in the calibration program. Follow the calibration instructions and you are set.