Loading...

You have no items in your shopping cart.

Currency
 
 
 
×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). EasyDriver requires a 7V to 30V supply to power the motor and can pow

EasyDriver

Model: IM120606012

Regular Price: $14.00

Special Price $8.50

Availability: In stock

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse. EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors.
 

Product Description

Details

Overview

The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). EasyDriver requires a 7V to 30V supply to power the motor and can power any voltage of stepper motor. The EasyDriver has an on board voltage regulator for the digital interface that can be set to 5V or 3.3V. Connect a 4-wire stepper motor and a microcontroller and you've got precision motor control! EasyDriver drives bi-polar motors, and motors wired as bi-polar. I.e. 4,6, or 8 wire stepper motors. 

This is the newest version of EasyDriver V4 co-designed with Brian Schmalz. It provides much more flexibility and control over your stepper motor, when compared to older versions. The microstep select (MS1 and MS2) pins of the A3967 are broken out allowing adjustments to the microstepping resolution. The sleep and enable pins are also broken out for further control.

Note: Do not connect or disconnect a motor while the driver is energized. This will cause permanent damage to the A3967 IC.

Documents

Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.

Technical support

For technical support, please open a ticket on Itead Support System.

Additional Information

Additional Information

Discontinued Yes
Link Wiki No
EWeLink Support No
Module Type Driver
Weight 10 g
Model IM120606012
Board Size 4.8 x 2 x 1.5cm
Version 1
Operation Level Digital 5V

Reviews

Customer Reviews

Needs a revision Review by Jimmy
Just wanted to save everyone a few hours of troubleshooting.
Resistors R1, R2 must be replaced with 0.75 ohm resistors. 1 ohm seems to work as well. These boards come with 0 ohm mounted, which does NOT work, at least not with my motors
(42BYGH3404). Symptoms are weird stepping pattern: takes 2 full steps out of 8 pulses, instead of 8 microsteps out of 8 pulses. (Posted on 4/14/2013)

Write Your Own Review

Only registered customers who has bought this product can write reviews. Please, log in or register.