Gboard Pro 800 SIM800 GSM / GPRS Module 3.3v ATmega2560 Mainboard For Arduino Starter

Overview

Gboard Pro 800 is a unique Arduino mainboard with SIM800 GSM / GPRS module, XBee socket, nRF24L01 + module interface, micro SD card interface, ITDB02 parallel LCD module interface, electronic brick interface and ATmega2560 chips, which can achieve wireless control via XBee, nRF24L01 + or GSM / GPRS with functions covering from smart home to remote control of robots to meet various needs of different projects.

Note:

• 1. There is a USB connector on the board for debugging or firmware uploading only.
• 2. The serial interface (bootloader connection) is 3.3v, not the typical 5v as on many Arduino boards - anyone using an alternative to the Foca board must take note not to risk damage.

Attention: You can power the board through either the DC jack or the battery socket but NOT both at the same time. There is no Li-ion battery charger circuit on this board.

Specification

Electrical Characteristics

Packing List

• 1* Gboard Pro 800
• 1* GSM Antenna

Documents

Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.

Technical support

For technical support, please open a ticket on Itead Support System.