Loading...

You have no items in your shopping cart.

Currency
 
 
 
×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

This is designed for Arduino UNO Mega2560 R3. The controller of this module is ILI9341, providing pin-saving SPI communication.

ITDB02-2.2S 2.2" SPI TFT LCD Display Module Shield For Arduino UNO Mega2560 R3

Model: IM140714001
$15.00

Availability: In stock

ITDB02-2.2S module is 2.2" SPI TFT LCD Display with 262K color 320 x 240 resolutions. The controller of this LCD Display module is ILI9341, providing pin-saving SPI communication without sacrificing the data transmitting speed. Since its interface is SPI, you need 6 Dupont lines (SCK,MISO,MOSI,CS,D/C,RST) to control this TFT LCD display arduino module. Moreover, this module integrates an SD card slot.
 

Product Description

Details

Overview

ITDB02-2.2S module is 2.2" SPI TFT LCD with 262K color 320 x 240 resolutions. The controller of this LCD module is ILI9341, providing pin-saving SPI communication without sacrificing the data transmitting speed.

Since its interface is SPI, users need 6 Dupont lines (SCK,MISO,MOSI,CS,D/C,RST) to control this LCD module. Moreover, this module integrates an SD card slot.

Documents

Please visit our wiki page for more information about this product. Any suggestions for improvement, such as correcting errors, adding more demo codes or tutorials, will be highly appreciated.

Technical support

For technical support, please open a ticket on Itead Support System.

Additional Information

Additional Information

Discontinued Yes
Link Wiki No
Display Resolution 320 * 240
Display Interface Serial
Screen Type Non-touch Screen
Display Controller No
TFT display interface N/A
Display Size 2.2”
Board Size 41mm X 68mm X 1.6mm
Expand SD Card Socket
Weight 38 g

Reviews

Customer Reviews

A handy kit to send data to TFT and work with the SD SPI interface. Review by Dmitry
Advantages: No problems with sending data to TFT and SD card.
Disadvantages: No connect the MISO line with TFT inside the board. Therefore, to obtain data from the TFT is not possible. I think so.
Notes: The MISO line is inside the Board (before the level Converter U2) has no contact with the TFT. The SPI_MISO line (after the level Converter U2) always has a low level until the SD card is missing. The MISO line is easily pulled up to the VCC3V3 10k resistor. (Posted on 7/14/2015)
MISO only for SD-card Review by Dmitry
The MISO line is inside the Board (before the level Converter U2) has no contact with the TFT. This line always has a low level until there is no SD card. The MISO line is easily pulled up to the VCC3V3 10k resistor.
Summary: if that is true, then the user cannot use the commands read from the TFT, while there is no SD card.
P.S. This is true for ITDB02-2.4 S (Model: IM140714002), I think. (Posted on 6/27/2015)

Write Your Own Review

Only registered customers who has bought this product can write reviews. Please, log in or register.