ad banner

You have no items in your shopping cart.



Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

This is a 800x480 (resolution), 5.0 inch arduino TFT LCD screen. Using SSD1963 controller, it support 16bit data interface, easy to be driven by many MCU like STM32.

ITDB02 5.0" TFT LCD Display Module Shield SSD1963 For Arduino

Model: IM120419008
ITDB02-5.0 display module is a 5.0" Arduino TFT LCD with 65K color 800x 480 resolutions. The controller of this LCD module is SSD1963. It supports 16bit data interface with control interface of 4 wires. Moreover, this Arduino module contains the touch screen and SD card socket.

Product Description



ITDB02-5.0 display module is a 5.0" TFT LCD with 65K color 800 x 480 resolutions for Arduino starter. The controller of this LCD module is SSD1963. It supports 16bit data interface with control interface of 4 wires. Moreover, this Arduino LCD module contains the touch screen and SD card socket as well.

ITDB02-5.0 is a professional Arduino TFT LCD display module that supported by UTFT Library.

Note: If users want to use it with Arduino Mega or Arduino ADK, they will still need an ITDB02 MEGA Shield(IM120417024), as shown below:


Please visit our wiki page for more information about this product. Any suggestions for improvement, such as correcting errors, adding more demo codes or tutorials, will be highly appreciated.

Technical support

For technical support, please open a ticket on Itead Support System.

Additional Information

Additional Information

Discontinued Yes
Link Wiki No
Display Resolution 800 x 480
Display Interface Parallel 16 Bit
Screen Type Touch Screen
Display Controller SSD1963
TFT display interface Parallel 16 bit
Display Size 7.0”
Board Size 11.75×8.93cm
  • SD Card Socket
  • Touch Screen
Weight 135 g


Customer Reviews

a very good product, I would like to know how on/off the light by soft ? Review by Jean-Pierre
just to add my astronomic clock : 2lcd itb2 5.0" 2 interface for arduino mega2560 and 2 arduino mega2560 and a lot of works to do it :
Thanks ITEAD ! (Posted on 10/16/2015)
a visual demo is better to explain Review by Jean-Pierre

jp (Posted on 9/3/2014)
It is fully compatible with BASIC ! Review by Jean-Pierre
I have the pleasure to announce we have now a full program working under Basic Bascom for it, touch screen, sd-card special fonts ...everything is working !
more info Bascom forum Arduino.
(Posted on 9/1/2014)
Work fine with Basic Bascom Review by Jean-Pierre
I use it with a set of program found of the bascom forum and it works well, fast
Arduino mega2560+ ITB2 Arduino Mega shield+ITB2_5.0
(Posted on 7/6/2014)
Works great with new library Review by John
Touch works without any modifications using the latest library. Just make sure you change the, #define TOUCH_ORIENTATION to LANDSCAPE and replace the 32s with 50 in myGLCD(ITDB32S,38,39,40,41) , in the calibration program. Follow the calibration instructions and you are set. (Posted on 12/21/2013)
Update RE: iBoard Pro Review by Yosty
Beware: To use this screen with the iBoard Pro you must bypass the 500mA fuse on the 5V circuit of the iBoard Pro.

Works great! (Posted on 12/5/2013)
Great board, but BEWARE with iBoard Pro Review by Yost
BEWARE, when using this screen with the iBoard Pro the board must be supplied with an external source of 3.3V power in addition to its regular power source. This screen overdraws the 3.3V regulator on the iBoard Pro and the board will not function without an additional external source...

Otherwise this is a great screen and it works well with the current UTFT library including touch and calibration with the following lines for the iBoard Pro: (see the UTFT documentation for info).
UTFT myGLCD(ITDB50,38,39,40,41);
UTouch myTouch(6,5,48,3,2); (Posted on 12/5/2013)
Using the SD card ITDB02-5.0 with Arduino Mega Review by kloster
How to store images to include them in a sketch for arduino mega 2560. (Posted on 6/2/2013)
Good product and touch does work Review by Kevin
Good display.
Touch does work with Henning's UTouch library. The X and Y are transposed and only scaled to a 320 x 240 display. The transposing is easy:
y = myTouch.getX();
x = myTouch.getY();
The scaling just takes a little bit of coding to fix, like so (from Henning's Quickdraw example):
myGLCD.drawPixel ((x*800)/240, (y*480)/320);
It's probably trivial to fix the library but it's beyond me. (Posted on 1/2/2013)
Graphics Great, Touch unsupported Review by Phil
This screen is great as a diplay module, but out of the box the touch doesn't work and is not compatible with ITDB02_Touch. The screen needs calibrating and there is no arduino code to be able to perform this calibration as the calibration sketch is not designed for this unit and Henning Karlsen is not planning to recode it at this time. (Posted on 11/5/2012)
A product that's worth the price! Review by Ralf
The products look top notch, the packaging is excellent, and the care taken to put things in the box and ship them is outstanding! (Posted on 8/17/2012)

Write Your Own Review

Only registered customers who has bought this product can write reviews. Please, log in or register.