Nextion HMI 2.8" TFT Screen Intelligent Display Module with integrated 4-wire Resistive Touch Panel For Arduino Developer 320x240 65K 4pin interface NX3224T028
Nextion is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to Internet of thing (IoT) or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.
Nextion includes a hardware part (a series of TFT boards) and a software part (the Nextion editor). The Nextion TFT board uses only one serial port to communicate. It lets users avoid the hassle of wiring. We noticed that most engineers spend much time in application development but get unsatisfactory results. As a solution to this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich the interface design. Furthermore, the drag-and-drop function ensures that users spend less time in programming, which will reduce 99% of their development workloads. With the help of this WYSIWYG editor, designing a GUI is a piece of cake.
It's easy to adapt Nextion family HMI to existing projects. Users just need to provide it a UART.
NX3224T028 is a powerful 2.8'' HMI, which is member of Nextion family. Features include: a 2.8" TFT 320x240 resistive touch screen display, 4M Flash, 2KByte RAM, 65k colors.
Package include: a Basic Nextion 2.8'' display, a wire, a power supply test board
Note: there's a small power supply test board and a wire for you to test if the electricity supply is enough or not. Please see below image how to use it.
Check out the amazing features of this product below.
- 320 x 240 Resolution
- RGB 65K true to life colours
- TFT Screen with integrated 4-wire Resistive Touch Panel
- Easy 4 pin interface to any TTL Serial Host
- 4M Flash memory for User Application Code and Data
- On board micro-SD card for firmware upgrade
- Visual Area:57.6mm(L)×43.2mm(W)
- Adjustable Brightness:0~180 nit, the interval of adjustment is 1%
- 5V65mA power consumption
- Compatible with Raspberry Pi A+, B+ and Raspberry Pi 2.
- Powered directly off the Raspberry Pi, no external power supply is required
- Generic using for all Arduino or Raspberry Pi project.
Please visit our wiki page for more information about this product. Any suggestions for improvement, such as correcting errors, adding more demo codes or tutorials, will be highly appreciated.
For technical support, please open a ticket on Itead Support System.
|Display Resolution||320 * 240|
|Screen Type||Touch Screen|
|TFT display interface||N/A|
In the recent days, before find Nextion, I tested many TFT touch screen Arduino compatible. I only can say, that Nextion is in this moment the best alternative, due to the short time to make and excelent human interface. In short time I made a pro like interface, and for a very low price. I wish to Nextion the best of the best.
I must said also, that only I have some trouble because my laptop dont' have a serial port. And with a USB to Serial adapter is not enough, because the display used TTL levels and no the RS232 ones. But I solve that very quickly, with a MAX232N IC and some wires on protoboard, to translate the RS232 levels to TTL ones. That worked fine. Also, I must said that yet I not find enough documentation about the sintaxis of the commands to the "user code" section and the API documentation is some obscure for me.
Thanks to the people behind Nextion.
Best regards, Yohan.