Login
Registration
Profile Informations
Login Datas
or login
Product Description
Details
Electronic Brick
Yes! We can build electronics projects just as easy as piling bricks. Arduino and community have made the programming much easier than ever before. How about some elixir on hardware part? Maybe it is not yet convenient to make complex interfaces, but we can at least start from the most commonly used modules.
By using electronic bricks, you may connect Arduino compatible boards easily with various digital, analog and I2C/Uart interfaces. These the breadboard-less firm connection are prepared to extensive modules like poteniometers, sensors, relays, servos...even buttons, just plug and play.
Each terminal module has buckled port with VCC, GND and Output, which has corresponding port on the sensing board, with a plain 2.54mm dual-female cable you may start playing already. Buckled brick cables are like cement for bricks, make the connections easier, secure and more professional looking.
Overview
This Serial Bluetooth brick is easy to use module compatible with existing Stem Basic Shield. It designs for transparent wireless serial connection setup. Serial port Bluetooth module is fully qualified Bluetooth V2.0+EDR(Enhanced Data Rate) 3Mbps Modulation with complete 2.4GHz radio transceiver and baseband. It uses CSR Bluecore 04-External single chip Bluetooth system with CMOS technology and AFH(Adaptive Frequency Hopping Feature). Hope it will simplify your overall design/development cycle.Connect the + pin to 5v and - pin to GND, TX RX pin connect to the seiral pins.
Documents
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents by correcting the errors, adding more demo codes or tutorials.
Technical support
For technical support, please open a ticket on Itead Support System.
Additional Information
Additional Information
Discontinued | Yes |
---|---|
Link Wiki | No |
Brick Interface | 4PIN Parallel |
Brick Power Supply | 3.3V |
Board Size | 37 × 21 × 0.8mm |
LED Color | No |
Weight | 15 g |
Reviews
Customer Reviews
- MICROLOG Review by MICROLOG TECNOLOGIA Y SISTEMAS, S.L. B80378409
-
Overall Rating - Works fine Review by Julien Carme
-
Works fine so far, but please update the product description (and the photo): this not a 3 wire cable which is required, but a 4 wire parallel cable.
The documentation (on the web site) is quite confusing as well (no direct link to the actual doc). (Posted on 9/4/2012) - Works great Review by Carl
- It took 15 days for product to be delivered to me. but only 4 days from China to USA so i can live with that. product received well packaged and in good condition. (Posted on 8/23/2012)