×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

ITEAD 1602 LCD Keypad Characters Display Shield With Arudino LCD4Bit library For Arduino Board

Model: IM120417018
3 Review(s)

Customer Reviews

3 Item(s)

per page
Works well on FEZ Panda II, except for the select button Review by Famory
I have tested the board with a GHIElectronics Fez Panda II using the driver provided for their own card. It almost works without any change in the code. The screen worked perfectly as well as 5 of the buttons. Only the select button doesn't provide a value yet. Reading some Netduino forums (http://forums.netduino.com/index.php?/topic/4035-freetronics-lcd-select-keypad-problem/), it sounds like I'm not the only one to have this problem. This seems to come from the voltage that is using 3.3V instead of 5V.

I still consider it as minor as all the other functions work pretty well. It's still possible to add a separate button on A1 for example.
(Posted on 7/19/2013)
Works well Review by Stephen Davies
Works well, nice clear display.

Reasons I don't give it 5 out of 5:
1) LCD pins differ from those used in Arduino example code.
Use - LiquidCrystal lcd(8, 9, 4, 5, 6, 7);
2) LCD write pin is not connected, therefore cannot define custom characters in display.
3) Error in schematic. Pin 10 appears to control LCD backlight. (Posted on 9/4/2012)
EXCELLENT SERVICE Review by kevin
Item arrived with some damage, but the afterservice was great! (Posted on 8/23/2012)

3 Item(s)

per page

Write Your Own Review

Only registered users can write reviews. Please, log in or register