ad banner
Loading...

You have no items in your shopping cart.

Currency
 
 
 
×

Registration

Profile Informations

Login Datas

or login

First name is required!
Last name is required!
First name is not valid!
Last name is not valid!
This is not an email address!
Email address is required!
This email is already registered!
Password is required!
Enter a valid password!
Please enter 6 or more characters!
Please enter 16 or less characters!
Passwords are not same!
Terms and Conditions are required!
Email or Password is wrong!
Captcha is required!
Captcha is wrong!

Review Details

Electronic Brick - DS18B20 1 - Wire Digital Thermometer Module

Electronic Brick - DS18B20 1 - Wire Digital Thermometer Module

Product Review (submitted on July 20, 2013):
This device works on 1-Wire networks and comes with it's own serial number (equivalent to a MAC id for a PC on a network).

Hard to imagine this thing that is as small as a transistor has it's own little micro controller on board with ROM but it does! You can query it's ID number with each temperature reading and request a reading from it by ID. This enables you to use 1,000 or more of these temperature controllers on the SAME *single* I/O pin!

Plays nice with other 1-wire devices too (I have put it on a network with another temperature sensor and 4k memory module, all using the same 1 pin... just unbelievable.

1-wire networks couldn't be simpler... just give each device ground and power, and connect them all to the same data line, and you're done. They will communicate on the network by ID request and can talk back and forth without data collision.

This is also accurate to about 1/5th of a degree, and responsive enough to about a new reading every 1/5th of a second (anything higher and it seems to return identical data). You can breathe on it and watch the temperature rise about 4 degrees and drop back down within a few seconds. You can place it close to but not touching your body and watch it raise about half a degree. VERY sensitive. Couldn't ask for much better than this!

This unit comes with both 3 and 4 pin connectors and 1 screw mount hole for easy placement, and also comes with SMD mounted cap and resistor to make it play extra nice. Very nice design by Itea Studios!