NoticeDifference between revisions of "ACS712 Current Sensor Brick"
From ITEAD Wiki
(→Features) |
(→Specifications) |
||
| Line 16: | Line 16: | ||
==Specifications== | ==Specifications== | ||
| + | {| border="1" | ||
| + | |||
| + | | PCB size||30.0mm X 24.0mm X 1.6mm | ||
| + | |- | ||
| + | | Working voltage||5V | ||
| + | |- | ||
| + | | Input current type||AC or DC | ||
| + | |- | ||
| + | | Compatible interfaces||2.54 3-pin interface and 4-pin Grove interface(1) | ||
| + | |- | ||
| + | | Wiring interface||Power terminal(2) | ||
| + | |} | ||
| + | |||
| + | ''Note 1： S for analog output port, V and G for voltage at the common collector and ground respectively | ||
| + | |||
| + | Note 2: “+”for current inflow port“-”for current outflow port'' | ||
==Electrical Characteristics== | ==Electrical Characteristics== | ||
Revision as of 01:54, 27 May 2014
Contents
Overview
Electronic brick of current sensor is based on ACS712 sensor, which can accurately detect AC or DC signals. The maximum AC or DC that can be detected can reach 5A, and the present current signal can be read via analog I / O port.
Features
1. Plug and play, easy to use. Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market.
2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock.
3. Terminals with screws for easy wiring and removing.
Specifications
| PCB size | 30.0mm X 24.0mm X 1.6mm |
| Working voltage | 5V |
| Input current type | AC or DC |
| Compatible interfaces | 2.54 3-pin interface and 4-pin Grove interface(1) |
| Wiring interface | Power terminal(2) |
Note 1： S for analog output port, V and G for voltage at the common collector and ground respectively
Note 2: “+”for current inflow port“-”for current outflow port
