IBoard Pro

From ITEAD Wiki
Revision as of 03:34, 20 May 2014 by Ivy (Talk | contribs)

Jump to: navigation, search



IBoard Pro is a unique Arduino board which features a WIZnet Ethernet port with POE, an XBee socket, ITDB02 Serial/Parallel LCD module interface, RTC, nRF24L01+ module interface, Micro SD socket and an ATMega2560. This board will add wireless XBee control as well as internet connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless!

IBoard Pro can be used as an Ethernet, wireless communication project development platform. IBoard Pro support POE (power on Ethernet) power supply, and Micro SD for mass storage. There are some 3pin electronic brick/ sensor brick interface breakout on board, it offer an easy way for a quick prototyping. You can setup a web server through which you may communicate with a remote Arduino using XBee radios, bluetooth or APC modules. This information can be posted to a web site, or to Twitter.

The board requires FTDI basic board to upload sketch, you can use our Foca board to do it. Iboard can be powered by a mini USB , power Jack or POE.


PCB size 124.46mm X 72.39mm X 1.6mm
Power supply 7-23V DC
Microprocessor Atmega2560
Indicators PWR, Tx, Rx, COL, FDX, SPD, LINK,TEST
Communication Interface Ethernet RJ45,XBee,nRF24L01+,UART,IIC
RoHS Yes

Electrical Characteristics

Specification Min. Typical Value Max. Unit
Power Voltage 7 - 23 VDC
Input Voltage VH (Target Voltage = 3.3V) 3 3.3 3.6 V
Input Voltage VL: -0.3 0 0.5 V
Current Consumption - 100 500 mA



Top View Map

Pin Map

ITDB02 Parallel LCD Module Interface

ITDB02 EB Interface

nRF24L01+ Module Interface

Micro SD Socket

W5100 Communication Interface


IBoard Pro is compatible with SD and Wiznet libraries of Arduino.cc, and all demo codes could be downloaded directly and run on it.

With embedded bootloader, IBoard Pro is easy to use by Arduino IDE through Foca series. ISP of Atmega2560 is broke out for download firmware easily


Datasheet for IBoard Pro

Schematic for IBoard Pro

Demo Code for IBoard Pro

Fritzing Parts for IBoard Pro

Useful Link

By michu <Make StripInvaders Cheaper: Use An IBoard>

Andy Karpov's GitHub Page <RF24 library that supports nRF24L01 on iBoard>

Andy Karpov's GitHub Page <RF24Network library that supports nRF24L01 on iBoard>

By NI$HANT <IBoard not able to access A6 and A7>

<Fritzing Parts: ITEAD Development Board>