Difference between revisions of "Iteaduino BT"

From ITEAD Wiki
Jump to: navigation, search
(Useful Link)
Line 31: Line 31:
==Useful Link==
==Useful Link==
[http://www.linotux.ch/arduino/iteaduino_bt.html <Correct Iteaduino BT Datasheet>]
[http://www.youtube.com/watch?v=zW_0AZRsHWA By Michael Doherty <Iteaduino BT Test Vedio>]
[http://techwatch.keeward.com/geeks-and-nerds/how-to-configure-and-use-an-iteaduino-bt/ By Benjamin Bellamy <How-To configure and use an Iteaduino BT>]
[http://blog.iteadstudio.com/application-note/warless-program-your-iteaduino-bt-2/ <Wireless Programming Your Iteaduino BT>]
[http://blog.iteadstudio.com/fritzing-parts-itead-development-board/ <Fritzing Parts: ITEAD Development Board>]

Revision as of 03:52, 17 May 2014


Iteaduino-BT is an Arduino compatible board with a master/slave Bluetooth Module HC-05. It based on Arduino UNO/Duemilanove, 100% compatible with its existing program and shields, but with the bluetooth wireless funcion. The power consumption is about 50% of the original Arduino boards.


Design for Bluetooth communication

Compatible with Arduino UNO/Duemilanove pins, holes and dimensions

Wide range external input from 7~23V DC

Pins out for Sensor and Servo

3.3V/5V Operating Voltage selection






Datasheet for ATMEGA328

Datasheet for Iteaduino BT

Demo Code for Iteaduino BT Master Mode

Schematic for Iteaduino BT

Fritzing Parts for Iteaduino BT

Useful Link

<Correct Iteaduino BT Datasheet>

By Michael Doherty <Iteaduino BT Test Vedio>

By Benjamin Bellamy <How-To configure and use an Iteaduino BT>

<Wireless Programming Your Iteaduino BT>

<Fritzing Parts: ITEAD Development Board>