Iteaduino MEGA 2560

From ITEAD Wiki
Revision as of 06:25, 20 May 2014 by Ivy (Talk | contribs)

Jump to: navigation, search


Iteaduino MEGA2560.jpg

Iteaduino MEGA2560 is a derivative version of the Arduino MEGA 2560. It’s designed is basing on Arduino MEGA, 100% compatible to its existing program and Arduino shields, but the smaller size, lower power consumption and with much practical improvement. In addition, it has all ATMega2560 pins breakout, which more 16 pins than Arduino MEGA 2560. Note: It does not support all the Mega shields because of the size.


  • Arduino shields compatible
  • 3.3V / 5V operation level
  • Wide range power supply and low power consumtion
  • Small size , but all ATMega2560 pins breakout




Microprocessor Atmega2560
PCB Size 59mm X 77mm X 1.6mm
Indicators Power,D13,Tx,Rx
Power supply(recommended) 6-23V DC
Power supply(limits) 23 VDC(max)
Communication Protocol UART,SPI,IIC
Clock Speed 16MHz
RoHS Yes


Datasheet for Iteaduino MEGA 2560

Schematic for Iteaduino MEGA 2560

Fritzing Parts for Iteaduino MEGA 2560

Related Document

Useful Link

By butch <Solution for Itead mega 2560 not recognized by USB>

by Garry <Iteaduino MEGA 2560 + GPS shield to make a logger>

<Fritzing Parts: ITEAD Development Board>