NoticeDifference between revisions of "Iteaduino UNO"
From ITEAD Wiki
(→Spec) |
(→Features) |
||
| Line 3: | Line 3: | ||
==Features== | ==Features== | ||
| − | New external IO pin map | + | * New external IO pin map |
| − | Efficient DC-DC Power supply with wide range input | + | * Efficient DC-DC Power supply with wide range input |
| − | 3.3V/5V Operating Voltage selection | + | * 3.3V/5V Operating Voltage selection |
| − | All pins out for Sensor and Servo | + | * All pins out for Sensor and Servo |
| − | UART/IIC interface breakout | + | * UART/IIC interface breakout |
==Hardware== | ==Hardware== | ||
Revision as of 03:33, 19 May 2014
Overview
Iteaduino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
Features
- New external IO pin map
- Efficient DC-DC Power supply with wide range input
- 3.3V/5V Operating Voltage selection
- All pins out for Sensor and Servo
- UART/IIC interface breakout
Hardware
Spec
- Microprocessor: ATmega328,ATmega8U2
- PCB size: 68.58mm X 58.42mm X 1.6mm
- Indicators: Power,TX,RX,D13
- Power supply(recommended): 7-23V DC
- Power supply(limits): 23 VDC (max)
- Communication Protocol: UART,SPI,IIC
- Clock Speed: 16MHz
Download
Fritzing Parts for Iteaduino UNO
