Iteaduino UNO

From ITEAD Wiki
Revision as of 03:33, 19 May 2014 by Ivy (Talk | contribs)

Jump to: navigation, search


Iteaduino Uno is a microcontroller board based on the Arduino UNO. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.


  • New external IO pin map
  • Efficient DC-DC Power supply with wide range input
  • 3.3V/5V Operating Voltage selection
  • All pins out for Sensor and Servo
  • UART/IIC interface breakout




  • Microprocessor: ATmega328,ATmega8U2
  • PCB size: 68.58mm X 58.42mm X 1.6mm
  • Indicators: Power,TX,RX,D13
  • Power supply(recommended): 7-23V DC
  • Power supply(limits): 23 VDC (max)
  • Communication Protocol: UART,SPI,IIC
  • Clock Speed: 16MHz


Datasheet for Iteaduino UNO

Schematic for Iteaduino UNO

Fritzing Parts for Iteaduino UNO

Useful Link

<Fritzing Parts: ITEAD Development Board>