From ITEAD Wiki
Revision as of 08:08, 20 May 2014 by Ivy (Talk | contribs)

Jump to: navigation, search



MBoard is a unique Arduino board which features a L298P motor driver, an XBee socket, nRF24L01+ module interface, Micro SD socket and an ATMega32U4. The bootloader of Mboard is based on Arduino Leonardo. With motor driver chip L298P, this board can drive the DC motor directly and stepper motor with software IO control. This board will add wireless as well as motor control connectivity to your projects. It’s great for anything from home automation to robot control. The possibilities are endless!


PCB size 80.77mm X 57.66mm X 1.6mm
Power supply 7~23V DC
POE supply 7~23V
Microprocessor Atmega32u4
Indicators PWR, Tx, Rx, D13, C1, C2, C3, C4
Communication Interface XBee,nRF24L01+,UART,IIC

Electrical Characteristics

Specification Min Type Max Unit
Power Voltage 7 - 23 VDC
Input Voltage VH (Target Voltage = 3.3V) 3 3.3 3.6 V
Input Voltage VL: -0.3 0 0.5 V
Current Consumption(Except Motor Drive Current) - 100 500 mA
Peak Output Current(Every Channel)

-Non Repetitive(t=100us)

- - 3 A
-Repetitive(80%on-20%off, ton=10ms) - - 2.5 A
-DC operation - - 3 A



Top View Map

Pin map

ITDB02 EB Interface

Index of Interface Name of Interface Index of Arduino Pin of Atmega32u4
1 EB0 A0 PF7
2 EB1 A1 PF6
3 EB2 A2 PF5
4 EB3 A3 PF4
5 EB4 A4 PF1
6 EB5 A5 PF0




Datasheet for MBoard

Schematic for MBoard

Fritzing Parts for MBoard

Useful Link

<Fritzing Parts: ITEAD Development Board>