NoticeDifference between revisions of "Sonoff SC"
m (→WIFI Characteristics) |
m (→Downloads) |
||
| (11 intermediate revisions by the same user not shown) | |||
| Line 3: | Line 3: | ||
Sonoff SC is an ESP8266 based WiFi environmental monitor device. It detects current temperature, humidity, light intensity, air quality (particulate), and even sound levels (noise pollution), and directly send realtime data to iOS/Android APP EWeLink. | Sonoff SC is an ESP8266 based WiFi environmental monitor device. It detects current temperature, humidity, light intensity, air quality (particulate), and even sound levels (noise pollution), and directly send realtime data to iOS/Android APP EWeLink. | ||
| − | Go shopping [https://www.itead.cc/sonoff-sc.html Sonoff SC | + | Go shopping [https://www.itead.cc/sonoff-sc.html Sonoff SC (SKU:IM161129002 )] |
==Features== | ==Features== | ||
| − | + | Power supply: micro USB 5V | |
| − | Display | + | Display real-time environment around: |
| − | *Realtime temperature( | + | *Realtime temperature(0-100℃) and humidity(%) |
*Light level: dusky, normal, bright | *Light level: dusky, normal, bright | ||
*Air quality: bad, moderate, unhealthy | *Air quality: bad, moderate, unhealthy | ||
| Line 34: | Line 34: | ||
• Standby power consumption is less than 1.0 mW (DTIM3) | • Standby power consumption is less than 1.0 mW (DTIM3) | ||
| − | |||
| − | |||
• Other parameters are as follows | • Other parameters are as follows | ||
| Line 54: | Line 52: | ||
| Operating current || Average： 80mA | | Operating current || Average： 80mA | ||
|- | |- | ||
| − | | Operating temperature || - | + | | Operating temperature || 0ºC-40ºC(32°F-104°F) |
|- | |- | ||
| − | | | + | | Operating Humidity || 5%-90%RH, Non-condensing |
|- | |- | ||
|rowspan=7 |Software Parameter || Wireless network mode || station/softAP/SoftAP+station | |rowspan=7 |Software Parameter || Wireless network mode || station/softAP/SoftAP+station | ||
| Line 74: | Line 72: | ||
==Electrical Characteristics== | ==Electrical Characteristics== | ||
| + | {| class="wikitable" | ||
| + | ! scope="col" | Parameter || scope="col" | Condition || scope="col" | Min || scope="col" | Type || scope="col" | Max || scope="col" | Unit | ||
| + | |- | ||
| + | | Max solder temp. || IPC/JEDEC J-STD-020 || || || style="text-align:right" | 260 || ℃ | ||
| + | |- | ||
| + | | Working volt. || || 3.0 || 5 || style="text-align:right" | 5.5 || V | ||
| + | |- | ||
| + | | Working current || || - || 80 || style="text-align:right" | 110 || mA | ||
| + | |} | ||
| + | |||
==Downloads== | ==Downloads== | ||
| + | [[:File:Sonoff-SC-Schematic.pdf |Sonoff SC Schematic]] | ||
| + | |||
| + | [[:File:FWTRX-TAMCUSC-SONOFFSC-ATMEGA328P.zip |Hack Sonoff SC]] | ||
| + | |||
| + | [[:File:0A-ESP8266_Specifications_v4.1.pdf |ESP8266 Datasheet V4.1 EN]] | ||
| + | |||
| + | ==Useful Link== | ||
| + | [http://ewelink.coolkit.cc/?p=200 User Guide for Sonoff SC] | ||
| + | |||
| + | [https://www.itead.cc/wiki/EWeLink_Introduction eWeLink Step-By-Step Guide] | ||
| + | |||
| + | [http://support.iteadstudio.com/support/discussions/topics/11000001238 Wi-Fi Socket/Switch Fail to be Controlled Troubleshooting] | ||
| + | |||
| + | Features wanted, bug report and discuss in [http://support.iteadstudio.com/support/discussions/1000058207 Itead Smart Home For | ||
Latest revision as of 01:51, 25 January 2018
Contents
Overview
Sonoff SC is an ESP8266 based WiFi environmental monitor device. It detects current temperature, humidity, light intensity, air quality (particulate), and even sound levels (noise pollution), and directly send realtime data to iOS/Android APP EWeLink.
Go shopping Sonoff SC (SKU:IM161129002 )
Features
Power supply: micro USB 5V
Display real-time environment around:
- Realtime temperature(0-100℃) and humidity(%)
- Light level: dusky, normal, bright
- Air quality: bad, moderate, unhealthy
- Sound level: quiet, normal, noisy
WIFI Characteristics
• 802.11 b/g/n
• Built-in Tensilica L106 ultra-low power consumption 32-bit micro-MCU, dominant frequency support 80 MHz and 160 MHz, support RTOS
• Built-in TCP/IP protocol stack
• Built-in TR switch, balun, LNA, power amplifier and matching network
• Built-in PLL, voltage regulator and power supply management components, 802.11b mode +20 dBm output power
• A-MPDU&A-MSDU aggregation and 0.4μs guard interval
• WiFi @ 2.4 GHz, supports WPA / WPA2 safe mode
• Support cloud OTA upgrade
• Support STA/AP/STA + AP mode
• Standby power consumption is less than 1.0 mW (DTIM3)
• Other parameters are as follows
| Category | Parameters | Description |
|---|---|---|
| Wireless Parameter | Wireless standard | 802.11 b/g/n |
| Frequency range | 2.4GHz-2.5GHz (2400M-2483.5M) | |
| Hardware Parameter | Data port | UART/I2C |
| GPIO/PWM | ||
| Operating voltage | 3.0~3.6V(recommend 3.3V) | |
| Operating current | Average： 80mA | |
| Operating temperature | 0ºC-40ºC(32°F-104°F) | |
| Operating Humidity | 5%-90%RH, Non-condensing | |
| Software Parameter | Wireless network mode | station/softAP/SoftAP+station |
| Security mechanism | WPA/WPA2 | |
| Encryption type | WEP/TKIP/AES | |
| Firmware upgration | Local serial programming/Cloud Upgrade/Host download programming | |
| Software development | Support secondary development | |
| Network protocols | IPv4, TCP/UDP/HTTP/FTP | |
| User configuration | cloud server, Android/iOS APP |
Electrical Characteristics
| Parameter | Condition | Min | Type | Max | Unit |
|---|---|---|---|---|---|
| Max solder temp. | IPC/JEDEC J-STD-020 | 260 | ℃ | ||
| Working volt. | 3.0 | 5 | 5.5 | V | |
| Working current | - | 80 | 110 | mA |
Downloads
Useful Link
Wi-Fi Socket/Switch Fail to be Controlled Troubleshooting
Features wanted, bug report and discuss in [http://support.iteadstudio.com/support/discussions/1000058207 Itead Smart Home For
