Tilt Sensor/Switch Brick
Electronic brick of tilt switch can be connected to analog I/O port and used in tilt sensor for smart car or robot. When the sensor is in the horizontal position, the output is high level; when the sensor rotates counterclockwise to form an angle of more than 15 ° with the horizontal line, the output is low level.
1. Plug and play, easy to use. Compatible with the mainstream 2.54 interfaces and 4-Pin Grove interfaces in the market.
2. With use of M4 standard fixed holes, compatible with M4-standard kits such as Lego and Makeblock.
|PCB size||24.0mm X 21.0mm X 1.6mm|
|Working voltage||3.3 or 5V DC|
|Operating voltage||3.3 or 5V DC|
|Compatible interfaces||2.54 3-pin interface and 4-pin Grove interface(1)|